Exterior Inground 400 Series

The Exterior™ Inground 400 series is a range of uncomplicated, easy-to-use color-changing LED luminaires. Perfect for installations with visible light sources, the Exterior Inground series combines the benefits of dynamic light and discreet installation. The recessed housing can be made to fit any type of surface with a trim ring available in beveled and flush-mount versions, for discreet installation both day and night.

The series is available in various configurations. The Exterior Inground 400™ has a narrow beam. The Exterior Inground 410™ blends the output of its RGBW LED sources in its lenses, delivering perfectly pre-mixed colors. And the Exterior Inground 420™ gives variable color temperature white light from 2700 to 6500 K.

  • Bright, efficient in-ground fixture with full LED color mixing
  • Advanced optical performance with uniform distribution of light and color
  • Durable, low-maintenance construction

Features

  • Choice of premixed RGBW, single-color RGBW or variable CT white LEDs
  • Up to 3500 lumens at full white (RGBW)
  • Glare shield and anti-skid glass options available
  • Choice of five beam angle options
  • Remote control and configuration via DMX and RDM
  • Rugged drive-over IP67 housing

References

Tech specs

Physical Fixture: Height: 315 mm (12.4 in.) Outer diameter at top of fixture: 310 mm (12.2 in.) Weight: 9.5 kg (44.1 lbs.) Top ring (trim ring): Flush-mount top ring outer diameter: 329 mm (13.0 in.) Flush-mount top ring thickness: 7 mm (0.3 in.) Beveled top ring outer diameter: 340 mm (13.4 in.) Beveled top ring thickness: 5 mm (0.2 in.) Installation Sleeve: Installation sleeve height: 400 mm (15.8 in.) Installation sleeve base flange external diameter: 416 mm (16.4 in.)
Dynamic Effects All models Intensity: 0 - 100% Exterior Inground 400 and 410 Color mixing: RGBW Exterior Inground 420 Color temperature control: 2700 K - 6500 K
Control and Programming All models Control systems: DMX, RDM Setting and addressing: RDM Receiver: RS-485 Firmware update: Serial upload via DMX link DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Exterior Inground 400 and 410 DMX channels: 3/4 Exterior Inground 420 DMX channels: 2
Optics All models Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions: Exterior Inground 400 Light source: R, G, B and W single-color LEDs Beam angle options: 7°, 14°, 31°, 57°, 7° x 60° Exterior Inground 410 Light source: RGBW quad-color LED Beam angle options: 19°, 22°, 36°, 65°, 20° x 61° Exterior Inground 420 Light source: 2700 K and 6500 K LEDs Beam angle options: 7°, 14°, 31°, 57°, 7° x 60°
Photometric Data Exterior Inground 400 Total luminous output: TBA Exterior Inground 410 Total luminous output: 3500 lumens Exterior Inground 420 Total luminous output: TBA
Construction Housing: Aluminum Finish: Black anodized Trim ring: Stainless steel Installation method: In installation sleeve Color: Black Protection rating: IP67 RoHS compliant Weight resistance (in installation sleeve with stable groundwork): 4000 kg (from vehicle tire for example)
Installation Installation method: Installation sleeve (ordered separately) Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
Electrical AC power: 100-277 V~ nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power consumption, steady state, all LEDs at zero intensity: TBA
Typical Power and Current 120 V, 60 Hz: 1.3 A, 142 W, PF 0.99 230 V, 50 Hz: 0.7 A, 142 W, PF 0.97 Measurements made at nominal voltage. Allow for a deviation of +/- 10 %:
Thermal Cooling: Conduction / convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-4° F), power must be maintained below 0° C (32° F) Maximum surface temperature, steady state, at 40° C ambient: 90° C (194° F) Total heat dissipation (calculated, +/- 10%): 490 BTU/hr.
Approvals EU safety: EN60598-2-5 (EN60598-1), EN60598-2-13, EN62471, EN62493 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety (pending): ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety (pending): CSA C.22.2 No. 250 Australia/NZ (pending): RCM
Accessories Installation sleeve: P/N TBA Trim ring, flush mount installation: P/N TBA Trim ring, beveled installation: P/N TBA Narrow beam diffuser kit: P/N TBA Medium beam diffuser kit: P/N TBA Wide beam diffuser kit: P/N TBA Very wide diffuser kit: P/N TBA Asymmetrical diffuser kit: P/N TBA Directional diffuser kit: P/N TBA Anti-glare shield (internally mounted): P/N TBA Anti-skid front glass: P/N TBA
Ordering Information Inground 400, bevelled, EU: P/N 90507105 Inground 400, bevelled, US: P/N 90507135 Inground 410, bevelled, EU: P/N 90507110 Inground 410, bevelled, US: P/N 90507140 Inground 420, bevelled, EU: P/N 90507115 Inground 420, bevelled, US: P/N 90507145

Solutions