Exterior Projection 1000

Outdoor rated large scale image projector

Exterior Projection 1000
Larger Images

Limited quantity available - please contact your dealer for information

The Exterior™ Projection 1000 is an unparalleled, powerful tool for permanent outdoor installations to integrate textures, patterns and graphics for limitless creative exterior lighting designs.

Sporting high impact and low maintenance, this advanced, IP66-rated LED projector offers sharp image quality, dynamic features and great reach over huge distances.

Creating custom gobos for building facades

Learn more about our product verification and reliability

  • Flat-field, high-contrast image projection with wide zoom range
  • Fully weatherized with low maintenance and running
  • Full CMY color mixing for maximum creativity
  • Built to last 

    It operates at temperatures from -30°C to 45°C and its robust, vandalism-proof IK08 and IP66-rated aluminum housing is surface treated to comply with the ISO12944/C5-M corrosion protection standard

  • Low total cost of ownership

    20 000 hours’ lamp life equals 8 hours’ daily use for 7 years. And even then, it will still produce 70% of its original output, which makes it highly superior to any traditional discharge image projector.

  • Creative tool box

    Four effect layers—gobos, prisms, animation, variable frost—along with a full CMY color mixing system, an additional color wheel as well as zoom and focus offer unlimited creativity

  • Easy installation

    Easy access to swift replacement of standard gobos with customized gobos, and a strong bracket offers quick mounting in any vertical position. Comes with bare-end power and DMX in/out cables for connection to a nearby junction box.

  • Easy control

    Remote controlled via 20-channel DMX protocol. RDM functionality for remote setting of address, reading of diagnostic information such as fixture running hours, LED running hours and temperature. Built-in OLED display to configure the fixture and program a standalone show with up to 20 scenes.

  • High precision optical system

    Flat field, high contrast image projection based on high power LED engine. The wide zoom range from 10° - 40° allows for exact projection on desired surface.

featured content

Built to last 

It operates at temperatures from -30°C to 45°C and its robust, vandalism-proof IK08 and IP66-rated aluminum housing is surface treated to comply with the ISO12944/C5-M corrosion protection standard

featured content

Low total cost of ownership

20 000 hours’ lamp life equals 8 hours’ daily use for 7 years. And even then, it will still produce 70% of its original output, which makes it highly superior to any traditional discharge image projector.

featured content

Creative tool box

Four effect layers—gobos, prisms, animation, variable frost—along with a full CMY color mixing system, an additional color wheel as well as zoom and focus offer unlimited creativity

featured content

Easy installation

Easy access to swift replacement of standard gobos with customized gobos, and a strong bracket offers quick mounting in any vertical position. Comes with bare-end power and DMX in/out cables for connection to a nearby junction box.

featured content

Easy control

Remote controlled via 20-channel DMX protocol. RDM functionality for remote setting of address, reading of diagnostic information such as fixture running hours, LED running hours and temperature. Built-in OLED display to configure the fixture and program a standalone show with up to 20 scenes.

featured content

High precision optical system

Flat field, high contrast image projection based on high power LED engine. The wide zoom range from 10° - 40° allows for exact projection on desired surface.

Videos

 

 

 

 

Features

  • Flat field, high contrast image projection based on high power LED engine
  • 0-100% electronic dimming
  • Full CMY color mixing + additional color wheel with 7 interchangeable colors
  • 7 gobo slots for projecting graphic images (gobos included)
  • Animation system for creating animated lighting effects (horizontal and vertical)
  • Zoom range from 10° - 44° for exact projection on desired surface
  • Variable frost for creating morphing effects and hybrid function as wash light
  • 2 rotating prisms for creating abstract multi patterns
  • Intuitive setup, configuration and stand-alone programming via graphical OLED display
  • RDM and DMX control
  • Fully weatherized IP66 fixture for permanent outdoor installation
  • Fully convection cooling using heat pipes technology

Specifications

  • Physical Length: 702 mm (27.7 in.) Width: 417 mm (16.5 in.) Height: 618 mm (24.4 in.) Weight: 50 kg (110 lbs.) All figures include mounting yoke
    Dynamic Effects Color mixing: CMY, independently variable 0 - 100% Color wheel: 7 interchangeable colors + open Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction Zoom: 10° - 44° (cut-off angles) Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing Frost filter: Motorized, variable Dimming: Electronic, constantly variable 0-100%, 16-bit control Shutter: Electronic, strobe and pulse effects, instant open and blackout Focus: Motorized, variable 3 m (9.8 ft.) to infinity
    Control and Programming Stand-alone control: Up to 20 scenes with global fade/hold times Control options: DMX, RDM, standalone Configuration, addressing and status: Onboard control panel with OLED display or via RDM 8-bit control: CMY, color selection, gobo selection, prism, frost, animation 16-bit control: Gobo indexing and rotation, zoom, focus and intensity DMX channels: 20 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
    Optics Light source: 440 W white light LED engine CRI (Color Rendering Index): 72 Color temperature: 6500 K (±250 K) LED lifetime: 20,000 hours (to >70% luminous output)* LED manufacturer: Appotronics Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions
    Photometric Data Cut-off angle: 10° - 44° Luminous intensity:

    At 10° zoom: 11,500 lumens
    At 16° zoom: 15,000 lumens
    At 40° zoom: 16,800 lumens

    Center Peak:

    At 10° zoom: 731,000 cd
    At 16° zoom: 311,000 cd
    At 40° zoom: 42,000 cd

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Finish: Hard anodized, white or metallic grey lacquered Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass Ingress protection: IP66 Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    EPA (Effective Projected Area): 0.28m²
    Gobos Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F) Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.) Maximum image diameter: 26 mm (1.02 in.) Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.) Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)* *Gobos thicker than 2.5 mm require a shorter spring in the goboholder
    Installation Mounting: Adjustable yoke Location: Suitable for wet locations. Do not immerse in water. Orientation: Any (sides must be kept vertical) Minimum distance to illuminated surfaces: 0.5 m (20 in.)
    Connections Power cable entry: IP66 cable gland Power connection: 1.8 m (5.9 ft.) cable tail with bare ends Power cable type: EU models: H07RN-F 450/700V, Ø10 mm US models: SJTW 14AWG, 300V, Ø9.3 mm Data cable entry: IP66 cable gland Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends
  • Electrical AC power: 100-120/200-277 V nominal, 50/60 Hz Power Supply: Auto-ranging electronic switch-mode Typical half-cycle RMS inrush current: 15.5 A Idle power (zero intensity, no effects applied): 75 W Surge protection: 4 KV
    Typical Power and Current 120 V, 60 Hz: 645 W, 5.5 A, PF 0.98 230 V, 50 Hz: 635 W, 2.9 A, PF 0.95 277 V, 60 Hz: 635 W, 2.6 A, PF 0.90 Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection, internal forced air Total heat dissipation (calculated): 2350 BTU/hr. Maximum surface temperature: 85° C (185 ° F) Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)**

    *Above this temperature, the fixture regulates output to protect from overheating.
    ** An integrated heat-element will heat-up internal components at ambient temperatures below 0° C (32° F) - For instant wake-up with no warm-up time, leave power applied constantly.

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 26 lm/W LWR*: 349 lm/kg (158 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE:

    IEC 60598-2-5 (IEC 60598-1)

    EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547 US safety: ANSI/UL 1598 US EMC: CFR 47 Part 15 Class A Canadian safety: CSA C22.2 No 250.0 Australia/NZ: RCM
    Included Items Silica gel desiccant bag: P/N 37220000 Two gobo retaining springs
    Related Items Martin Companion Cable:

    P/N 91616091
    Martin Companion Software Suite (including firmware uploader)

    Accessories Glare Shield, Exterior Projection 1000: P/N 91611768 Projection Setup Gobo, Exterior Projection 1000: P/N 91616075 Ring for gobo, OD30, set of 10 pcs: P/N MAR-91611851
    Spare Parts Silica gel desiccant bag in sealed foil pack: P/N 37220000 Goboholder for EP1000 with magnet incl. washer & short spring: P/N 50482185 Goboholder for EP1000 with magnet incl. washer & long spring: P/N 50482186
    Ordering Information EU models:

    Exterior Projection 1000, EU, Aluminum: P/N 90512000
    Exterior Projection 1000, EU, White: P/N 90512015

    US Models:

    Exterior Projection 1000, US, Aluminum: P/N 90512005
    Exterior Projection 1000, US, White: P/N 90512010

Downloads

  Version Language Size Uploaded
Specifications
file type icon Exterior Projection 1000 Spec Sheet
en version B, updated: Sep 2018
en  1.22 MB Sep 2018
file type icon Exterior Projection System Diagrams
en version A, updated: Oct 2020
en  267 KB Oct 2020
Manuals
file type icon Exterior Projection 1000 - User Manual
en version H, updated: Oct 2020
en  9.9 MB Oct 2020
Brochures
file type icon Pro Install Overview Brochure
en updated: Oct 2023
  en  23.1 MB Oct 2023
Photometrics
file type icon Exterior Projection 1000 - Photometric Files
en version A, updated: Mar 2024
en  184 KB Mar 2024
Illustrations
file type icon Exterior Projection 1000 - 2D dimensions (PDF)
en version B, updated: Sep 2021
en  1.27 MB Sep 2021
file type icon Exterior Projection 1000 - 2D dimensions (DWG)
en version B, updated: Sep 2021
en  15.2 MB Sep 2021
file type icon Exterior Projection 1000 - Line it up gobo
en version A, updated: May 2018
en  422 KB May 2018
Symbols
file type icon AutoCAD 2D Symbols
en version 2.2, updated: Mar 2024
2.2  en  3.74 MB Mar 2024
file type icon AutoCAD 3D Symbols
en version 2.2, updated: Mar 2024
2.2  en  14.3 MB Mar 2024
file type icon Vectorworks Symbols
en version 3.9, updated: Mar 2024
3.9  en  373 MB Mar 2024
CAD Drawings
file type icon Exterior Projection 1000 - 3D dimensions (3DS)
en version B, updated: Sep 2021
en  9.64 MB Sep 2021
file type icon Exterior Projection 1000 - 3D dimensions (DWG)
en version B, updated: Sep 2021
en  12.7 MB Sep 2021
Bim Objects
file type icon Exterior Projection 1000 - BIM Object
en version A, updated: Sep 2021
en  Sep 2021
Compliances
file type icon Exterior Projection 1000 - EU Declaration of Conformity
version A, updated: May 2018
  95.9 KB May 2018
file type icon Exterior Projection 1000 - ETL Listing Verification
version A, updated: May 2018
  261 KB May 2018
file type icon Exterior Projection 1000 - Product verification and reliability report
version A, updated: May 2018
  472 KB May 2018
Service Notes
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
version 4, updated: Oct 2020
  743 KB Oct 2020
file type icon Exterior products - Performing a vacuum test - Tech note
en version H, updated: Oct 2020
en  1020 KB Oct 2020
Tech Notes
file type icon Martin Exterior Projection 500/1000 Gobo Alignment Washer
en version A, updated: Jan 2020
en  117 KB Jan 2020
Firmware
platform icon Exterior Projection 1000 - Firmware
version 1.8.0, updated: Mar 2024
1.8.0     Mar 2024

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

News

Support/FAQs

HARMAN Professional Solutions:

Exterior Projection 1000

Outdoor rated large scale image projector


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - IK08  Martin Warranty - 4KV