VC-Feeder

The VC-Feeder is a smart, multi-protocol driver box for the VC-Dot series. A compact design and IP65 rating make it perfectly suited for installation close to a string of VC-Dots. The VC-Feeder provides the string with clean, regulated power, even if the power supply is located far away. Compatibility with the P3 System Controller™ (via the P3 PowerPort 1500™) gives it high-quality image processing capabilities with extremely easy setup and configuration.

How processing works for LED video

  • Driver unit for VC-Dot products
  • Compatible with P3 and DMX
  • Easy cabling and configuration

Features

  • High-quality, 16-bit-per-color image processing technology
  • IP65 rated for permanent outdoor or indoor use
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller family
  • Hybrid power + data input (single cable for power and data input)
  • Hybrid power + data thru (to daisy-chain multiple VC-Feeders)
  • Hybrid power + data output (to a string of VC-Dots)
  • Surface- and truss-mountable

Tech specs

Physical Length: 164 mm (6.5 in.) including mounting ears Width: 68 mm (2.7 in.) Height: 36 mm (1.5 in.) Weight: 590 g (1.3 lbs.)
Control and Programming Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX Protocol detection: Automatic Product detection: Automatic Control modes: Adapts to detected product DMX channels: Adapts to detected product Setting and addressing: P3 System Controller or RDM-compliant controller DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Via P3 System Controller
Control/User Interface Device status: Multicolor status LED Device test and reset: Pushbutton to call up local test patterns and reset device
Video Processing Brightness control Gamma correction and control Color temperature control Calibration processing Synchronization
Construction Housing: Extruded aluminum Protection rating: IP65 RoHS compliant
Installation Orientation: Any Surface mounting: Two M6 mounting slots Truss mounting: M12 mounting hole for standard rigging clamp
Connections Power & data input: 6-pin custom IP65-rated Power & data thru: 6-pin custom IP65-rated Power & data output: 8-pin custom IP65-rated
Electrical Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU Output voltage: 15 VDC Maximum total power consumption: 135 W
Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -20° C Total heat dissipation (calculated, +/- 10%): 46 BTU/hr. (not including display devices but with system at full load) Thermal monitoring: Integrated temperature sensor allowing thermal protection shutdown
Approvals EU safety: EN 60950 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1
Accessories Input cables: Hybrid Input Adapter Cable, 4-pin male XLR to 6-pin female IP65, 0.25 m (0.9 ft.): P/N 11840165 Hybrid Lead-In Adapter cable, 5-pin m. XLR + power (two wire tails) to 6-pin fem. IP65, 0.25 m (0.9 ft.): P/N 11840174 Hybrid Input Adapter Cable, 5-pin male XLR + Tripix Power IP66 to 6-pin female IP65, 0.25 m (0.9 ft.): P/N 11840195 Extension cables: Hybrid Extension Cable, IP65 to IP65, 1 m (3.3 ft.): P/N 11840167 Hybrid Extension Cable IP65 to IP65, 2.5 m (8.2 ft.): P/N 11840168 Hybrid Extension Cable, IP65 to IP65, 5 m (16.4 ft.): P/N 11840169 Hybrid Extension Cable, IP65 to IP65, 10 m (32.8 ft.): P/N 11840170 Hybrid Extension Cable, IP65 to IP65, 25 m (82.1 ft.): P/N 11840164 Output/throughput cables: Hybrid Output Adapter Cable, 6-pin male IP65 to 4-pin female XLR, 0.25 m (0.9 ft.): P/N 11840166 Data Out/Thru Adapter Cable, 6-pin m. IP65 to 5-pin fem. XLR, 0.25 m (0.9 ft.): P/N 11840202 Loose Hybrid Cable and Connectors: Hybrid Cable Without Connectors, 100 m (328.1 ft.): P/N 11840204 Hybrid Cable Connector, IP65, user-installable, male: P/N 05343522 Hybrid Cable Connector, IP65, user-installable, female: P/N 05323538 Rigging hardware: G-clamp: P/N 91602003 Half-coupler clamp: P/N 91602005 Quick trigger clamp: P/N 91602007 Hybrid cables carry power and data over separate conductors: IP65 connectors are custom items:
Related Items Martin VC-Dot 1™ Martin VC-Dot 4™ Martin VC-Dot 9™ Martin P3-050™ System Controller: P/N 90721090 Martin P3-100™ System Controller: P/N 90721010 Martin P3-150™ System Controller: P/N 90721015 Martin P3-200™ System Controller: P/N 90721020 Martin P3-300™ System Controller: P/N 90721060 Martin P3-PC™ System Controller: P/N 90721030 Martin P3 PowerPort 1500™: P/N 90721040 Martin P3™ PowerPort 1000 IP Installation: P/N 90721080 Martin P3™ PowerPort 1000 IP Rental: P/N 90721070 Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330
Ordering Information VC-Feeder™: P/N 90357040

Solutions